How do you convert maps?
- Altoona+BeachCreek
- Conductor
- Posts: 211
- Joined: Wed Jun 27, 2012 8:44 pm
- Location: Altoona, PA-Former PRR Shops!
How do you convert maps?
Namely, from 1.06 to TM? And yes, I mean my "Not Meant to Be" map. The game crashed when I tried to open it in the TM editor.
"Train roll on, on down the line. Take me many miles from my home."
Re: How do you convert maps?
Most maps can be converted with some work. Unless you started putting down AI players and rail-lines then you may have some difficulties.
There should be a post by Edbangor on this somewhere. Make sure you turn off all 1.06 industries and industries that are not in TM and remove any of those buildings if you manually placed them there. Also be sure any events with locomotives/industries that aren't in TM are removed. Most of the time it will crash because of an industry that got placed on the map and forgotten about.
Edit: The link with the text file to download about how to convert: viewtopic.php?f=72&t=2337
There should be a post by Edbangor on this somewhere. Make sure you turn off all 1.06 industries and industries that are not in TM and remove any of those buildings if you manually placed them there. Also be sure any events with locomotives/industries that aren't in TM are removed. Most of the time it will crash because of an industry that got placed on the map and forgotten about.
Edit: The link with the text file to download about how to convert: viewtopic.php?f=72&t=2337
- Altoona+BeachCreek
- Conductor
- Posts: 211
- Joined: Wed Jun 27, 2012 8:44 pm
- Location: Altoona, PA-Former PRR Shops!
Re: How do you convert maps?
Thank you! I'll get right to work. There are tracks though, because the map I'm editing has them already.
"Train roll on, on down the line. Take me many miles from my home."
- Altoona+BeachCreek
- Conductor
- Posts: 211
- Joined: Wed Jun 27, 2012 8:44 pm
- Location: Altoona, PA-Former PRR Shops!
Re: How do you convert maps?
The TM editor is not working at all.
I did what you said on 1.06, saved it, copied the new file into TM, then tried to edit, crash.
Decided it wouldn't be a big deal to start over and looked for the One Korea map, remembered I don't have it on TM, tested editing CA06, crash, tested Alt USA, crash. I really don't feel like doing something complicated right now, so it will probably be a 1.06 map. Sorry.
"Train roll on, on down the line. Take me many miles from my home."
- nedfumpkin
- CEO
- Posts: 2163
- Joined: Sat Feb 16, 2008 9:16 pm
- Location: Hamilton - Canada
Re: How do you convert maps?
Sounds like you don't have tm installed correctly, or you haven;t properly cleared the map of 1.06 things.
- nedfumpkin
- CEO
- Posts: 2163
- Joined: Sat Feb 16, 2008 9:16 pm
- Location: Hamilton - Canada
Re: How do you convert maps?
I'll post a copy of the One Korea map set up for tm later today. There are buildings on the map that have to be removed.
- Altoona+BeachCreek
- Conductor
- Posts: 211
- Joined: Wed Jun 27, 2012 8:44 pm
- Location: Altoona, PA-Former PRR Shops!
Re: How do you convert maps?
Thank you, I apprecite the help. I just want to finish something for once.
"Train roll on, on down the line. Take me many miles from my home."
- Altoona+BeachCreek
- Conductor
- Posts: 211
- Joined: Wed Jun 27, 2012 8:44 pm
- Location: Altoona, PA-Former PRR Shops!
Re: How do you convert maps?
Thanks! I guess I do have TM installed wrong, because it still crashed during the "Building Databases" phase. I'll look into that.
"Train roll on, on down the line. Take me many miles from my home."
- nedfumpkin
- CEO
- Posts: 2163
- Joined: Sat Feb 16, 2008 9:16 pm
- Location: Hamilton - Canada
Re: How do you convert maps?
Did it give you a missing file message? what is it?
- Altoona+BeachCreek
- Conductor
- Posts: 211
- Joined: Wed Jun 27, 2012 8:44 pm
- Location: Altoona, PA-Former PRR Shops!
Re: How do you convert maps?
No, it just says "Railroad Tycoon 3 has stopped working." That's what usually comes up. It's what it said before I disabled T&L.
"Train roll on, on down the line. Take me many miles from my home."
- nedfumpkin
- CEO
- Posts: 2163
- Joined: Sat Feb 16, 2008 9:16 pm
- Location: Hamilton - Canada
Re: How do you convert maps?
You didn't install TM properly. TM has the T%L disabled by default. Try re-installing TM from scratch....
- Altoona+BeachCreek
- Conductor
- Posts: 211
- Joined: Wed Jun 27, 2012 8:44 pm
- Location: Altoona, PA-Former PRR Shops!
Re: How do you convert maps?
Alright, I did that, and everything is working fine now. Thanks for the help guys!
"Train roll on, on down the line. Take me many miles from my home."
- nedfumpkin
- CEO
- Posts: 2163
- Joined: Sat Feb 16, 2008 9:16 pm
- Location: Hamilton - Canada
Re: How do you convert maps?
Good to hear. I suggest that you play Persian Electric to get a sense of the game, and the nukes component.